Mon, 07 Oct 2024 16:33:16 CEST | login

Information for build host-installer-10.10.19.xcpng.5-2.xcpng8.3

ID3511
Package Namehost-installer
Version10.10.19.xcpng.5
Release2.xcpng8.3
Epoch
Sourcegit+https://github.com/xcp-ng-rpms/host-installer.git#0188cff560a307e00cbe3f3c3232c77415b53718
SummaryXenServer Installer
DescriptionXenServer Installer
Built bykojiadmin
State complete
Volume DEFAULT
StartedThu, 26 Sep 2024 14:12:36 CEST
CompletedThu, 26 Sep 2024 14:13:51 CEST
Taskbuild (v8.3-ci, /xcp-ng-rpms/host-installer.git:0188cff560a307e00cbe3f3c3232c77415b53718)
Extra{'source': {'original_url': 'git+https://github.com/xcp-ng-rpms/host-installer.git?#0188cff560a307e00cbe3f3c3232c77415b53718'}}
Tags
built-by-xcp-ng
v8.3-ci
RPMs
src
host-installer-10.10.19.xcpng.5-2.xcpng8.3.src.rpm (info) (download)
x86_64
host-installer-10.10.19.xcpng.5-2.xcpng8.3.x86_64.rpm (info) (download)
host-installer-bootloader-10.10.19.xcpng.5-2.xcpng8.3.x86_64.rpm (info) (download)
host-installer-startup-10.10.19.xcpng.5-2.xcpng8.3.x86_64.rpm (info) (download)
host-installer-debuginfo-10.10.19.xcpng.5-2.xcpng8.3.x86_64.rpm (info) (download)
Logs
x86_64
hw_info.log
state.log
build.log
root.log
installed_pkgs.log
mock_output.log
Changelog * Thu Sep 26 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.19.xcpng.5-2 - Add missing dependency on pyOpenSSL * Wed Sep 25 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.19.xcpng.5-1 - Update to v10.10.19.xcpng.5 release, bringing: - Forbid upgrading with a key XAPI will reject * Thu Aug 08 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.19.xcpng.4-1 - Update to v10.10.19.xcpng.4 release, bringing: - Preserve stunnel certs - Mark 'Dual Stack' as experimental - Boot mode checks - Misc debugging improvements * Wed Jul 10 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.19.xcpng.3-1 - Update to v10.10.19.xcpng.3 release, bringing: - fix usage of driver disks such as intel-igb - fix abusive logging at "critical" level * Fri Jul 05 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.19.xcpng.2-1 - Update to v10.10.19.xcpng.2 release, bringing: - Fix installation of kernel-alt package when in kernel-alt mode * Wed Jul 03 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.19.xcpng.1-1 - Update to v10.10.19.xcpng.1 release, bringing: - #151: Fix UEFI Restore - CA-392758: Remove Firmware Boot Selected flag check - CP-49195: Allows to preserve first partition from MBR layout - CP-49641: Ignore errors mounting/unmounting explicit mount points - CA-392935: Release device if partition does not need to be resized - CA-392916: Create directory for mount= option - Better support for SDX upgrade - CA-391659: Set correct partition type restoring XS 7.1 - CP-47625: Replace mkinitrd with dracut command - CA-391027: Mount devices specified by mount= only when needed - CA-389160: Filter secrets when logging results/answers during failures * Wed Jun 12 2024 Samuel Verschelde <stormi-xcp@ylix.fr> - 10.10.6.xcpng.2-2 - Remove 0001-Prevent-upgrading-from-platform-3.4.0.patch - Makes upgrading from 8.3 or XenServer 8 possible again * Fri Apr 26 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.16.xcpng.2-1 - Update to v10.10.16.xcpng.2 release, bringing: - Make the unsupported / for-troubleshooting status of kernel-alt more obvious * Mon Apr 22 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.16.xcpng.1-1 - Loosely rebase packaging on XS's 10.10.16-1, bringing: - declaring support for 4KN-capable SR - run tests on package build - Update to v10.10.16.xcpng.1 release, bringing: - deprecate legacy BIOS boot - support for upgrading from old MBR to new GPT layout - allow 4KN-capable SR type to be used * Wed Feb 07 2024 Yann Dirson <yann.dirson@vates.tech> - 10.10.11.xcpng.3-3 - Prevent upgrades from XS 8 and XCP-ng 8.3 (intended for 8.3beta2 only) * Mon Jan 22 2024 Samuel Verschelde <stormi-xcp@ylix.fr> - 10.10.11.xcpng.3-2 - Loosely rebase on XS's 10.10.11-1 SRPM: only apply relevant packaging changes. - Sources unchanged: we keep our tarball. - Upstream packaging change included from XenServer's SRPM: - Handling of feature flags * Fri Dec 22 2023 Yann Dirson <yann.dirson@vates.fr> - 10.10.11.xcpng.3-1 - Update to v10.10.11.xcpng.3, bringing: - Fix regression preserving multipath configuration on upgrade * Fri Dec 15 2023 Yann Dirson <yann.dirson@vates.fr> - 10.10.11.xcpng.2-1 - Update to v10.10.11.xcpng.2, bringing: - Displays Supplemental Packs dialog when Driver Disks are used - XSI-1498: Log any exceptions parsing existing bootloader config - CA-385350 Fix handling of NTP configuration over upgrade * Mon Oct 16 2023 Yann Dirson <yann.dirson@vates.fr> - 10.10.9.xcpng.1-1 - Update to v10.10.9.xcpng.1 * Wed Jun 14 2023 Samuel Verschelde <stormi-xcp@ylix.fr> - 10.10.5.xcpng.1-2 - Loosely rebase on XS's 10.10.4-1 SRPM: only apply relevant packaging changes. - Sources unchanged: we keep our tarball. - Upstream packaging change included from XenServer's SRPM: - CP-40676: Clarify licensing * Wed Jun 14 2023 Benjamin Reis <benjamin.reis@vates.fr> - 10.10.5.xcpng.1-1 - Update to v10.10.5.xcpng.1 - Drop our patches as they're in the tarball from our own repo now - IPv6 support in TUI - Local SR: make EXT the default and first option instead of LVM - RAID: only propose creation with at least 2 disks and no RAID - RAID support: zap partition tables of disks before building a RAID - Show primary disk selection even if there is only one disk - Remove supplemental pack dialog at the end of installation - Don't install a depmod config identical to CentOS7, and stop causing udev service start to run "depmod -a" - apply module-removing trigger to kernel-alt too * Wed Nov 23 2022 Yann Dirson <yann.dirson@vates.fr> - 10.10.0-1.1 - Include a diff from v10.10.0 to v10.10.3-21-g3d5df76 * Mon Jun 06 2022 Mark Syms <mark.syms@citrix.com> - 10.10.0-1 - CP-39332: Check gpg signing on repo * Wed Mar 09 2022 Mark Syms <mark.syms@citrix.com> - 10.9.2-1 - CP-39330: remove obsolete GPG key injection, now in release * Wed Mar 02 2022 Mark Syms <mark.syms@citrix.com> - 10.9.1-1 - CA-364633: ensure the dir for the management file exists * Wed Jan 05 2022 Alex Brett <alex.brett@citrix.com> - 10.9.0-1 - CP-38454: Support use of stacked repositories during installation - CA-359850: Fix screen skipping on Set Time Manually screen * Mon Nov 29 2021 Deli Zhang <deli.zhang@citrix.com> - 10.8.1-1 - CP-37849: Support .treeinfo new format * Tue Aug 10 2021 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.8.0-1 - CP-37784: Add common-criteria-prep menu entry to GRUB config - CP-35398: Upgrade from PBIS to winbind * Thu Jul 08 2021 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.12-1 - CA-349118: Create modprobe files during upgrade * Fri Jun 04 2021 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.11-1 - CA-355255: Don't fail to install over another OS * Tue May 04 2021 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.10-1 - CA-353423: Upgrades should fail sooner when DOS util partition is detected * Thu Apr 15 2021 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.9-1 - Remove support for legacy partitions - CP-35049: Add support for optional build numbers * Tue Oct 06 2020 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.8-1 - CA-343729: Log exceptions from iSCSI setup * Mon Sep 21 2020 Ben Anson <ben.anson@citrix.com> - 10.7.7-1 - Revert "CP-34815: Force a valid hostname at all times" * Wed Sep 16 2020 Ben Anson <ben.anson@citrix.com> - 10.7.6-1 - CP-34815: Force a valid hostname at all times - CP-34873: remove references to genptoken services * Fri May 29 2020 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.5-1 - CA-337001: Prompt the user to re-init the disk if needed * Thu Mar 26 2020 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.4-1 - CA-336696: Handle errors when copying ownership - CA-336693: Pass the correct parameters to setEfiBootEntry() - CA-336693: Mount the ESP before restoring files - CA-336693: Fix UEFI restore when there is no storage partition * Wed Feb 05 2020 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.3-1 - CP-31090: Add network-init as a must-run service * Thu Jan 23 2020 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.2-1 - CA-332901: Fix sshd service enable with cc-preparations - CP-31092: Use different pool token generation in CC mode * Thu Dec 12 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.1-1 - CP-32298: Don't expect firstboot state to exist * Fri Dec 06 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.7.0-1 - Unbreak "safe" boot option on x2APIC machines - CP-31092: Move CC preparations from firstboot script to the installer - Remove outdated logrotate code - CP-32298: Reimplement 95-legacy-logrotate in the installer * Thu Nov 14 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.10-1 - CA-327217: Log efibootmgr failures when updating * Thu Oct 31 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.9-1 - CP-32365: Remove bugtool.py - CP-32365: Avoid logging ftp username/password in report.py - Restore username/passwords in URL dialog - Quote credentials correctly when saving reports - CA-329747: Fix url-encoding issues with username/passwords - CA-329747: Remove splitNetloc - CA-329192: Don't reveal if username doesn't have a password - CA-329837: Don't log the pool token * Thu Oct 24 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.8-1 - CA-329192: Don't leak HTTP/FTP credentials * Thu Aug 22 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.7-1 - CP-30221 / CA-325143: Switch to use chronyd for NTP - CP-25099: Remove timeutil - CP-25099: Set time before installation is started - CA-293794: Prefer NTP servers from DHCP - CP-30221: Use chrony.conf during upgrades * Mon Aug 12 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.6-1 - CA-310853: Add check to TUI call to prevent erroneous backward jumps - CA-322208: Ignore errors raised by deactivateAll() - CP-32019: Rework FCoE setup code to match post-installation * Thu Jul 18 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.5-1 - CA-322144: Dump iBFT state for debugging - CA-323227: Fix interactive installation with multipath - CA-322479: Prevent iSCSI session(s) getting logged out during shutdown - CA-317858: Re-enable job control for bash-shell - Remove xencons kernel parameter - CA-323599: Use full "com" parameter after installation * Mon Jun 10 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.4-1 - Improve "Installing ..." text - CA-319463: Don't restore certain files after upgrade * Tue May 28 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.3-1 - CA-317754: Drop unneeded legacy disk/by-id symlink handling - CA-317755: Fix installation when iBFT has no gateway - CA-260176: Use new DNS format for management interface config - CA-317642: Move repo length check earlier - Code style improvements and modernization * Wed May 08 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.2-1 - CA-296436: Disable mcelog on unsupported processors * Fri Apr 12 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.1-1 - CA-311401: Handle the upgrade of disks from aacraid to smartpqi * Wed Mar 27 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.6.0-1 - CP-30566: Add support for VirtIO Blk devices - CA-312390: Fix agetty parametrs, treat all ttys equally, fixing serial handling. - CA-313248 Match old branding EFI boot entries * Thu Mar 07 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.5.3-1 - CA-311773: Keep order of updates specified in the answerfile - CA-311543: Add serial support to ISOLINUX * Wed Feb 27 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.5.2-1 - CA-311306: Bump crash kernel memory to 256M * Fri Feb 22 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.5.1-2 - CA-301159: Drop dependency on xenserver-systemd-networkd * Thu Feb 14 2019 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.5.1-1 - CA-310736: iscsi: Don't use gateway if target is on the same subnet * Wed Feb 06 2019 jenniferhe <jennifer.herbert@citrix.com> - 10.5.0-1 - CA-306058: Don't try to restart iscsid - CA-306058: Fix setting up routing for iSCSI NICs - CP-30205: Remove legacy toolstack db references - CP-29627: Increase dom0 memory for the installer - CP-30557: Update installer to use new default_memory_for_version() function. - CA-309041: Apply updated dom0 memory size during upgrade * Tue Jan 15 2019 rossla <ross.lagerwall@citrix.com> - 10.4.1-1 - CP-30205: Remove legacy 6.x upgrade/restore code - CP-30232: Remove dead code in product._readSettings() * Thu Dec 06 2018 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.4.0-1 - CA-299191: write Dom0 uuid into /etc/sysconfig/xencommons - CA-304547: Rewrite iSCSI code - CA-304341: Prevent upgrades from versions of XS prior to 7 - CA-304341: Prevent restores to versions of XS prior to 7 - CP-30152: Use up to 16 vCPUs for installation - CP-30232: Add an option to use the legacy partition layout * Fri Nov 23 2018 Simon Rowe <simon.rowe@citrix.com> - 10.3.3-1 - CA-296524: retain any domain part of the hostname - CA-294300: Removed XenCenter.iso entry from fstab. * Fri Oct 12 2018 Simon Rowe <simon.rowe@citrix.com> - 10.3.2-1 - CP-29241: hide CC UEFI menu entry for master - CP-29685: Switch network stack to Linux Bridge when in CC mode * Fri Sep 28 2018 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.3.1-1 - CP-29085: transform to cc-preparations - CP-29091: parse service tag in answer file - CA-298702: COMPANY_PRODUCT_BRAND missing in /etc/xensource-inventory * Thu Aug 30 2018 Simon Rowe <simon.rowe@citrix.com> - 10.3.0-1 - CA-293743: wipe log system before mkfs - CA-290899: use file system tree rooted directory for rpm query - CA-295381: all packages should be upgraded * Fri Jul 27 2018 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.2.9-1 - CA-294085: log management config alternatives * Wed Jul 18 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.8-1 - CP-28832: Host installer should tolerate indexes on PCI bus locations * Tue Jul 17 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.7-1 - CP-28858: add extension to systemd-udevd.service * Mon Jun 25 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.6-1 - CA-290859 - Use `1-$MAX` syntax for dom0's vcpus - CA-291084: fix make-ramdisk option for update packaging format - CA-291084: restore S06mount - CA-291084: prevent multiple runs of subordinate scripts - Fixup whitespace * Wed May 30 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.5-1 - CA-289215: drop new format build from visual_version * Tue May 15 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.4-1 - CA-289278: Preserve xapi-clusterd db config after reboot * Mon Apr 23 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.3-1 - CA-288312: prefer hostname from /etc/hostname - CA-288312: do not write hostname to /etc/sysconfig/network * Mon Apr 16 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.2-1 - CA-283258: Ensure swap partition gets mounted during boot * Thu Feb 01 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.1-1 - CA-280682: Capture stderr rather than leaking to the console * Wed Jan 10 2018 Simon Rowe <simon.rowe@citrix.com> - 10.2.0-1 - CA-259657: determine timezone from /etc/localtime - CA-259657: extract keyboard map from /etc/vconsole.conf in preference - CA-259657: do not create obsolete files - CA-259657: hoist writei18n() to initial seq definition - CA-259657: always write /etc/hostname * Tue Nov 14 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.6-1 - CA-273150: Add missing import * Mon Oct 16 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.5-1 - CA-267428: Remove leftover logging - CA-267428: Use splitlines() rather than split() * Tue Oct 03 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.4-3 - CA-267961: delete unwanted firmware * Mon Oct 02 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.4-2 - CA-267877: inhibit creation of the initrd and cleanup /boot * Wed Sep 20 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.4-1 - CA-265171: Install bootloader to partition if needed - CA-263790: Don't remove the wrong volume group during upgrade - CA-266760: Allow upgrading packages from a driver disk - CA-266760: Fix progress calculation when upgrading packages * Tue Sep 05 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.3-1 - CA-261633: Add a helper function for multipath root - CA-261633: Fix restoring when using a multipath root - CA-263669: Don't hardcode the product name for upgrades - CA-263669: Fix upgrade with incorrect product names * Tue Aug 15 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.2-1 - CP-22698: drop package properties from inventory - Complete removal of BUILD_NUMBER - CA-260649: Use the default LVM directory - Change crash kernel to 192M somewhere below 4G * Wed Jun 28 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.1-1 - CA-257937: Ensure enough free space is available on the log partition - Remove some obsolete files * Wed Jun 14 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.0-2 - CP-22732: remove unwanted kernel files * Mon Jun 05 2017 Simon Rowe <simon.rowe@citrix.com> - 10.1.0-1 - CP-22508: extend branding with build number - Replace tabs with spaces. Python, being whitespace delimited, is sensitive to this being correct. - CA-255453: Add /var/lib/xcp/blobs to the restore list - CA-255453: Speed up restoring files - CP-17277, CP-17273: Enable tagged vlan support for host installer network. - CP-17274, CP-17275: Adding VLAN support for XenServer management interface - CP-17508: setting MANAGEMENT_INTERFACE in xensource_inventory is not needed during fresh install. - CP-17702: Parsing of existing management interface when VLAN is present. - CP-17703: 'more info' on 'use existing network' shows ip on vlan networks also. * Fri Apr 28 2017 Ross Lagerwall <ross.lagerwall@citrix.com> - 10.0.7-1 - CA-250911: write BRAND_CONSOLE_URL to /etc/xensource-inventory * Thu Apr 20 2017 Simon Rowe <simon.rowe@citrix.com> - 10.0.6-1 - remove build number from welcome message - CA-250335: Update results dict in place - CA-250869: Check fcoeadm contains VLAN id before parsing it * Tue Apr 11 2017 Simon Rowe <simon.rowe@citrix.com> - 10.0.5-1 - Remove unused module loading functions from hardware.py - CA-247345: Preserve log partition during upgrade (take 2) - CA-249629: Fix partitionsOnDisk() to handle multipath devices - CA-249629: Match sfdisk output lines containing a colon correctly * Mon Apr 03 2017 Simon Rowe <simon.rowe@citrix.com> - 10.0.4-1 - Revert "CA-247345: Preserve log partition during upgrade" * Mon Mar 27 2017 Simon Rowe <simon.rowe@citrix.com> - 10.0.3-1 - CA-247345: Preserve log partition during upgrade * Wed Mar 15 2017 Simon Rowe <simon.rowe@citrix.com> - 10.0.2-1 - tui: Fix appearance of build identifier * Thu Mar 09 2017 Simon Rowe <simon.rowe@citrix.com> - 10.0.1-1 - CA-246294: Don't hard-code the list of devices for local media